|
Care and Maintenance
The
TurboDraft unit is manufactured from aluminum and stainless steel.
Little maintenance is required to keep your TurboDraft unit in proper
operating condition.
•
Before and after using the TurboDraft, carefully inspect the unit
for any damage to the body, tail, and fire connections.
•
After use, flush the unit with clean water to remove any mud, sand
or debris from the inside and outside surfaces. Be sure to thoroughly
flush the 2-1/2 inch connection, as any sand or grit will effect
the swivel action. Also, inspect that the screen is free from any
obstructions (grass, leaves, etc.). Mild soap and a soft brush should
remove any dried mud or soils from the unit.
•
IMPORTANT - Inspect nozzle orifice to be sure there are no obstructions.
Any restrictions within the nozzle will dramatically effect the
performance of the TurboDraft unit.
•
Safely store the unit securely on or in the apparatus to avoid injury
to personnel and damage to the TurboDraft
|
